Módulo de pantalla LED flexible para interiores serie VF MIP W300*H168.75mm

1.Product Introduction

The MIP flexible module is an integrated Mini/Micro LED display device that combines the advantages of SMD and COB. Posee las ventajas de calidad de imagen de COB y la conveniencia de mantenimiento modular de SMD., resolver problemas como la susceptibilidad de los SMD a los impactos, falla de la lámpara, calidad de imagen mediocre, y poca confiabilidad y protección. It also addresses COB’s issues such as noticeable color differences when the screen is bright, difficult repairs, and inability to repair on-site.

The VF-MIP Series incorporates flexibility, el ahorro de energía, low heat generation, delgadez, y un 16:9 aspect ratio. It supports 2K/4K/8K/pixel-to-pixel resolutions and can be assembled into curved screens, cylinders, etc., according to requirements. It features dust and moisture resistance, alto contraste, wide viewing angles, high reliability, and highly consistent screen brightness and blackout. Its delicate and stable image quality makes it suitable for various scenarios such as commercial displays, command and control, television studios, and interactive conferences, providing efficient and high-quality display solutions for terminal products.

Product Dimensions

2.Product Features:

• High contrast ratio: 15000:1, high color reproduction, high grayscale, darker background, brighter screen, making the picture more delicate and clear.

• Wide viewing angle: The horizontal viewing angle reaches 170°, with no black spots when viewed from the side, providing a wider field of view suitable for viewing from multiple angles.

• Ultra-thin and lightweight: The module is only 4.1mm thick, making it more flexible and taking up less space.

• Common cathode design: Full flip-chip common cathode MIP module, with good stability, low power consumption and energy saving, fuego lento, small light decay, brillo alto, and low power consumption and energy saving of 50%.

• High protection and high reliability: Surface protection rating IP65, antiestático, shockproof, a prueba de polvo, and moisture-proof

• Easy to clean: The surface is smooth and hard. Simply wipe the surface gently with pure water and a microfiber lint-free cloth to clean it.

• The optimal 16:9 aspect ratio, supporting 2K/4K/8K/pixel-to-pixel resolution, is the preferred module size for command and control, conference rooms, and commercial all-in-one displays.

• Die-cast aluminum enclosure: Equipped with die-cast aluminum to enhance screen flatness, facilitate easy installation, and support inner curved screens, outer curved screens, and cylindrical screens.

• Optional: Hard link (with die-cast aluminum cabinet)

3.Curvatura de flexión del módulo suave

Los arcos interior y exterior están compuestos de 12 módulos, with a minimum cylinder diameter of 1146mm.

4.Product Parameters

5.Product Application

6. Embalaje del producto

7.Detalles de instalación

1. Maneje con cuidado para evitar caídas y colisiones.. Evite apretar o golpear los bordes de los módulos durante el montaje.. Utilice ventosas de vacío para el desmontaje..
2. Utilice guantes antiestáticos antes de tocar la pantalla o los módulos.. No toque directamente con las manos desnudas..
3. No limpie ni golpee violentamente los módulos con objetos duros o afilados.. Conecte y desconecte los cables con cuidado.
4. Do not use galvanized iron square tubing (it affects assembly accuracy). Sheet metal spray-coated enclosures or higher precision structures are recommended.
5. El área de instalación debe estar bien ventilada.. Si es necesario, instalar un aire acondicionado detrás de la mampara.
6. Mantenga la pantalla alejada de la humedad., Ácidos y álcalis corrosivos., fuertes vibraciones, y fuertes campos magnéticos. No coloque la pantalla directamente frente a la ventilación del aire acondicionado..
7. Los módulos deben estar separados por mamparas protectoras.. Do not stack them without partitions or place them directly on the ground.
8. El ángulo de flexión de los módulos debe estar entre 165° y 180°.. Do not subject the modules to repeated, violent bending.
9. Protect the display from rain and sun; avoid rain and immersion.
10. Use a separate grounding wire to ensure the display screen is properly grounded.
11. Power Supply Voltage: Common Cathode Module: 2.8V-3V (Red) / 3.8V-4V (Green/Blue).
12. Cleaning: After turning off the power, gently wipe the surface with pure water and a microfiber lint-free cloth. Do not use chemical solvents or abrasive cloths.
13. La alimentación debe desconectarse antes de la instalación/desmontaje/mantenimiento.. Do not operate while the power is on.
14. Operating Environment: Temperatura -10 ℃ ~ 40 ℃, Humidity 20%~90%RH.
15. Storage Conditions: Temperatura -40 ℃ ~ 60 ℃, Humedad 20%~80%RH.
16. Para cualquier pregunta relacionada con la aplicación, por favor consulte al fabricante. The manufacturer assumes no legal responsibility for consequences arising from failure to comply with this instruction manual or improper/unsafe use.

The module bending angle should be between 165° and 180°. Repeated bending of the module is prohibited.

Este documento se actualizará periódicamente., and we reserve the right to modify the specifications without notice. Póngase en contacto con nuestro equipo de servicio para obtener la información más reciente..