Гибкий светодиодный дисплейный модуль серии VF MIP W300*H168,75 мм для внутреннего использования

1.Product Introduction

The MIP flexible module is an integrated Mini/Micro LED display device that combines the advantages of SMD and COB. It possesses the image quality advantages of COB and the modular maintenance convenience of SMD, solving problems such as SMD’s susceptibility to impacts, lamp failure, mediocre image quality, and poor reliability and protection. It also addresses COB’s issues such as noticeable color differences when the screen is bright, difficult repairs, and inability to repair on-site.

The VF-MIP Series incorporates flexibility, сохранение энергии, low heat generation, худоба, и 16:9 aspect ratio. It supports 2K/4K/8K/pixel-to-pixel resolutions and can be assembled into curved screens, цилиндры, и т. д., according to requirements. It features dust and moisture resistance, высокий контраст, wide viewing angles, high reliability, and highly consistent screen brightness and blackout. Its delicate and stable image quality makes it suitable for various scenarios such as commercial displays, command and control, television studios, and interactive conferences, providing efficient and high-quality display solutions for terminal products.

Product Dimensions

2.Product Features:

• High contrast ratio: 15000:1, high color reproduction, high grayscale, darker background, brighter screen, making the picture more delicate and clear.

• Wide viewing angle: The horizontal viewing angle reaches 170°, with no black spots when viewed from the side, providing a wider field of view suitable for viewing from multiple angles.

• Ultra-thin and lightweight: The module is only 4.1mm thick, making it more flexible and taking up less space.

• Common cathode design: Full flip-chip common cathode MIP module, with good stability, low power consumption and energy saving, слабый нагрев, small light decay, высокая яркость, and low power consumption and energy saving of 50%.

• High protection and high reliability: Surface protection rating IP65, антистатический, shockproof, пыленепроницаемый, and moisture-proof

• Easy to clean: The surface is smooth and hard. Simply wipe the surface gently with pure water and a microfiber lint-free cloth to clean it.

• The optimal 16:9 aspect ratio, supporting 2K/4K/8K/pixel-to-pixel resolution, is the preferred module size for command and control, conference rooms, and commercial all-in-one displays.

• Die-cast aluminum enclosure: Equipped with die-cast aluminum to enhance screen flatness, facilitate easy installation, and support inner curved screens, outer curved screens, and cylindrical screens.

• Optional: Hard link (with die-cast aluminum cabinet)

3.Мягкая кривизна изгиба модуля

Внутренняя и внешняя дуги состоят из 12 модули, with a minimum cylinder diameter of 1146mm.

4.Product Parameters

5.Product Application

6. Упаковка продукта

7.Детали установки

1. Обращайтесь осторожно, избегайте падений и столкновений.. Избегайте сдавливания и ударов по краям модулей во время сборки.. Для разборки используйте вакуумные присоски..
2. Прежде чем прикасаться к экрану дисплея или модулям, наденьте антистатические перчатки.. Не прикасайтесь напрямую голыми руками.
3. Не протирайте и не ударяйте модули твердыми или острыми предметами.. Аккуратно подключайте и отключайте кабели.
4. Do not use galvanized iron square tubing (it affects assembly accuracy). Sheet metal spray-coated enclosures or higher precision structures are recommended.
5. Место установки должно быть хорошо вентилируемым.. При необходимости, установить кондиционер за экраном.
6. Берегите экран дисплея от влаги, агрессивные кислоты и щелочи, сильные вибрации, и сильные магнитные поля. Не размещайте экран дисплея прямо напротив вентиляционного отверстия кондиционера..
7. Modules must be separated by protective partitions. Do not stack them without partitions or place them directly on the ground.
8. Угол изгиба модулей должен составлять от 165° до 180°.. Do not subject the modules to repeated, violent bending.
9. Protect the display from rain and sun; avoid rain and immersion.
10. Use a separate grounding wire to ensure the display screen is properly grounded.
11. Power Supply Voltage: Common Cathode Module: 2.8V-3V (Red) / 3.8V-4V (Green/Blue).
12. Cleaning: After turning off the power, gently wipe the surface with pure water and a microfiber lint-free cloth. Do not use chemical solvents or abrasive cloths.
13. Перед установкой/демонтажом/обслуживанием необходимо отключить питание.. Do not operate while the power is on.
14. Operating Environment: Температура -10℃~40℃, Humidity 20%~90%RH.
15. Storage Conditions: Температура -40℃~60℃, Влажность 20%~80% относительной влажности.
16. По любым вопросам, связанным с применением, пожалуйста, проконсультируйтесь с производителем. The manufacturer assumes no legal responsibility for consequences arising from failure to comply with this instruction manual or improper/unsafe use.

The module bending angle should be between 165° and 180°. Repeated bending of the module is prohibited.

This document will be updated from time to time, and we reserve the right to modify the specifications without notice. Пожалуйста, свяжитесь с нашей сервисной командой для получения последней информации..