VF 250 series 250x250mm indoor flexible LED display module

1. Scope of application

This specification applies only to 250mm x 250mm module sizes (hereinafter referred to as “VF-250 series” products), with a pixel pitch of P1.953mm, and can be spliced ​​with internal and external display curved screens, cylindrical screens, curved screens and other displays;

2. Main technological features
   • The module features a standardized size design of 250mm x 250mm, offering high flatness, high protection, high brightness, high refresh rate, and low power consumption.
   • The module features a fully covered back cover, providing high protection and reliability. The drive surface is IP20, dustproof, and offers enhanced moisture resistance, protecting against external damage such as rats and cockroaches.
   • The entire series is suitable for cylindrical screens and curved screens with internal and external displays. Application scenarios include: planning museums, science and technology museums, urban planning museums, art museums, museums, creative centers, etc.
   • The module comes with 32 magnets, which fit perfectly with the cabinet, effectively improving the flatness of the screen and the user experience, and making the inner and outer curved effects better.
   • The module is only 4.5mm thick, featuring an ultra-thin and lightweight design that takes up little space.

3. Soft module appearance display
4. Soft module bending curvature

The inner and outer arcs are composed of 14 modules, with a minimum cylinder diameter of 1114mm.

• Module bending curvature diagram: Inner and outer arcs can be bent ≥167°

5.Installation

5.1 Installation diagram

5.2 Installation details and precautions

1. Handle with care to avoid drops and collisions. Avoid squeezing or bumping the edges of modules during assembly. Use vacuum suction cups for disassembly.
2. Wear anti-static gloves before touching the display screen or modules. Do not touch directly with your hands.
3. Do not wipe or violently strike the modules with hard or sharp objects. Plug and unplug cables gently.
4. Sheet metal spray-painted cabinets or higher precision structures are recommended. Using galvanized iron square tubing will affect assembly accuracy.
5. The installation area must be well-ventilated. If necessary, install an air conditioner behind the screen.
6. Keep the display screen away from moisture, corrosive acids and alkalis, strong vibrations, and strong magnetic fields. Do not place the display screen directly facing the air conditioner vent.
7. Modules must be separated by protective layers. Do not stack them without layers or place them directly on the ground.
8. The bending angle of the modules should be between 167° and 180°. Do not subject the modules to repeated bending.
9. Protect the modules from rain and sun. Avoid rain and immersion. 10. Use a separate grounding wire to ensure the display screen is safely grounded.
10. Power must be turned off before installation/disassembly/maintenance; live operation is prohibited.
11. Operating environment: Temperature -10℃~40℃, Humidity 20%~85%RH.
12. Storage conditions: Temperature -40℃~60℃, Humidity 20%~80%RH.
13. When cleaning dust, do not use a cloth, moist objects, or hard objects. Use an anti-static soft brush.
14. If you have any questions about the application, please consult the manufacturer. The manufacturer is not liable for any consequences arising from failure to comply with this instruction manual or improper or unsafe use.

*This document is subject to change from time to time. We reserve the right to modify the specifications without notice. Please contact our service team for the latest information.